Been testing out the GTX 1060, haven’t bought a graphics card in years. Last card I bought was an AMD HD7950 for my Mac Pro.
So far this graphics card has been amazing within this small case. Wanted to push it a little bit and hooked up 3 monitors, hitting 5760×1080 (16:3 aspect ratio). That’s 1080p per display.
2x 25″ Hannspree HF255
1x DELL U2711
Enable NVidia Surround to get all the displays to act as a single display.
While playing DOOM I was getting around 50-70FPS. Not to bad while playing on Ultra Settings with TAA.
The graphics card is set to 116% Power Target & Mem Clock Offset is +100 Mhz. No other overclocking is applied.
EVGA 1060 6G SC on Amazon:
Here’s a quick update. Recently got in pieces of hardware for this G4 Mod.
Heres the EVGA GTX 950. Got the mini version to fit within the case. Hooked it up to another system to verify it works and it’s doing a pretty good job, doesn’t use much power.
Also got in the Noctua fans, 20mm quite fans that do a pretty amazing job. Plus the i7-7700K & Samsung 950 Evo M.2
Mounted the Noctua fans at the top of the case for exhaust fans. Needed to cut the fins down to fit the fans. Screwed the fans into the metal casing to help avoid the fans from moving around.
Decided to take a quick break and print a Moon. Nothing super complicated, just a cool piece to have. I did manage to add in a Teensy 3.1 with a quick script that changes the moons color on startup. Chooses between different shades of white, yellow & blue. Running off a 3.7v 1000mAh battery. I am using a Single White LED to help give it an overall brightness and a RGB LED for the color.
As you see in the photos, the model is pretty detailed. That dark ring at the top is due to support material not fully removed, kinda hard to get at.
Here I start to remove all the old components in the Apple G4 Cube. You can see that there isn’t really much room for air flow, will be a tight fit for anything.
All the airflow will be coming from the bottom and coming out the top.
Will be pretty much 3 channels for airflow, CPU+Motherboard, PSU, & GPU channel. The CPU & GPU channels might need fans on the bottom of the case to help move the air since both of them will have side mounted fans. But time will tell, maybe the fans on the top for outtake will be enough to direct the airflow.
Starting a new project aka mod. Going to be gutting an Apple G4 Cube, which I bought for $80 on eBay almost 2yrs ago. Installing all new components. Intel i7-7700, EVGA GTX 1060 6GB, 32GB of Ram, etc. Below is the full list of components for this build, minus the tools used to complete this mod.
Will be working on this over the next couple of months. Slowing buying each component and modding the case to fit everything.
PCPartPicker part list / Price breakdown by merchant